| Ver | Date | Author | Contents |
|---|
| - | 27/May/2021 | | - Glossary is cleated.
- Power State Management SPEC
- The diagram of abstraction(Figure1) is improved.
- Described as a request comes from the Vehicle.
- Added the description of a device that sends CAN data to Hardware.
- The use cases are corrected.
- Starting up IVI quickly is considered at the default way of start-up, so the use case of IVI (normaly) start-up is removed.
- The power state of suspend is omitted.
- The reason why the state is not needed is that the state is not must in actual product in general
- The conditions of transition are improved
- From Running to Partially Running, the request of state change is from applications or services.
- From Partially Running to Power-off, the request of state change is from applications or services.
- Functional requirements are improved .
- Some services are defined as connected at Ready state
|
| 31/May/2021 | | |
| 8/Jun/2021 | | The following are added. |
| 10/Jun/2021 | | Use cases are improved. The column for clarifying the user is added. The following are added. |
| | | 4.4 Power state management - The outline of the above requirements document has been revised (background has been added).
- In addition, we have added the use cases that were pointed out in the Virtual Workshop.
|
| | | The titles of each chapter are changed. 4.2 Services Launch / Termination |
| | | The following are added. |
| | | Backup Data Management ⇒ Persistent Data Management |
| | | The following is added. 4.7 CAN Communication |
| 1.0 | | | The following is added. 4.8 GPS and Sensor information |
| | | Change the description of Abstraction and Use cases in 4.3 System Failure Detection and Procedure. |
